Design and Development of a Physics Laboratory Tool Based on Arduino Nano Sensor for the Topic of Uniformly Accelerated Linear Motion (UALM)

Authors

  • Maryani Maryani University of Jember
  • Syarifah Y Nur Azizah University of Jember
  • Wanda Febrianty University of Jember
  • Hanif Al Amri University of Jember
  • Tsamratul Fuadiyah University of Jember
  • Meylan Kharisma Putri University of Jember
  • Subiki Subiki University of Jember

DOI:

https://doi.org/10.54099/ijesd.v1i1.615

Keywords:

Instructional Aids, UALM, Arduino Nano

Abstract

Instructional aids serve as tools used in the teaching process to provide a clearer understanding of concepts and learning materials. The aim of this research is to design, assess the feasibility, and test the accuracy of a physics instructional aid based on Arduino Nano sensor for the topic of Uniformly Accelerated Linear Motion (UALM). The methods used in this research are literature review and design and development. This research consists of two stages: the first stage is the design stage of the instructional aid, and the second stage is the feasibility test of the instructional aid. In the design stage, there are five steps involved: preparing the tools and materials, assembling the track board, assembling the Arduino Nano and distance sensor circuit, assembling the components of the practical apparatus, and evaluation. The feasibility test of the Arduino Nano instructional aid was conducted through two experiments. From the results of the first experiment, testing the feasibility of the Arduino Nano instructional aid for Uniformly Accelerated Linear Motion (UALM), two findings were obtained. In the first experiment, when the time and angle varied, the graph showed that time is inversely proportional to the angle. On the other hand, in the second experiment, when the time and distance varied, the graph indicated that time is directly proportional to the distance.

References

Abdullah,M. (2016). Fisika Dasar I. Jakarta: Erlangga.

Aprillia, R. D., Alex, H., dan Subiki. (2022). Rancang Bangun Alat Peraga Fisika Efek Doppler Menggunakan Modul Sensor Suara dan Arduino. Jurnal Fisika Unand, 11(2), 139 – 145. https://doi.org/10.25077/jfu.11.2.139-145.2022

Candra Y, A., Pratama, H., Wahyuni M. T., & Nur H. M. (2019). Analysis of the skills of physics teacher candidates in designing simple Arduino-based physics experiments. Journal of Physics: Conference Series, 1175(1). https://doi.org/10.1088/1742-6596/1175/1/012051

Hidayatin, S., Verawati, N. N. S. P., Susilawati, S., & Syahrial, A. (2022). Pengembangan Perangkat Pembelajaran Berbasis Problem Based Learning untuk Meningkatkan Penguasaan Konsep Fisika Materi Momentum dan Impuls Kelas X. Jurnal Ilmiah Profesi Pendidikan, 7(2b), 663-671.

Ilmi, Y. F., Susila, A. B., & Iswanto, B. H. (2021). Using accelerometer smartphone sensor and phyphyox for friction experiment in high school. Journal of Physics: Conference Series, 2019(1). https://doi.org/10.1088/1742-6596/2019/1/012008

Kadir, A. (2015). Buku Pintar Pemrograman Arduino. Yogyakarta: Penerbit Mediakom.

Maiyena, S., Imamora, M., & Ningsih, F. (2018). Pengembangan Alat Praktikum Gerak Jatuh Bebas Menggunakan Sensor Phototransistor Untuk Pembelajaran Fisika Pada Materi Gerak Jatuh Bebas. Sainstek : Jurnal Sains Dan Teknologi, 9(1), 54. https://doi.org/10.31958/js.v9i1.750

Masyruhan, M., Pratiwi, U., & Al Hakim, Y. (2020). Perancangan Alat Peraga Hukum Hooke Berbasis Mikrokontroler Arduino Sebagai Media Pembelajaran Fisika. SPEKTRA: Jurnal Kajian Pendidikan Sains, 6(2), 134. https://doi.org/10.32699/spektra.v6i2.145

Putri, W. A., Astalini, A., & Darmaji, D. (2022). Analisis Kegiatan Praktikum untuk Dapat Meningkatkan Keterampilan Proses Sains dan Kemampuan Berpikir Kritis. Edukatif : Jurnal Ilmu Pendidikan, 4(3), 3361–3368. https://doi.org/10.31004/edukatif.v4i3.2638

Santosa, S. P., & Wijayanto, F. (2022). Rancang Bangun Akses Pintu Dengan Sensor Suhu Dan Handsanitizer Otomatis Berbasis Arduino. Jurnal Elektro, 10(1), 20-31.

Sebastian, R., Saputro, H., & Winingsih, P. H. (2021). Rancang Bangun Props Fisika Berbasis Sensor Arduinonano Pada Bahan Gerak Lurus Yang Berubah Tidak Beraturan ( Glbb ) Kriteria Validasi Unggul ( Sb ) Kriteria Respons. 5(2), 26–30.

Tina, A., Saehana, S., & Wahyono, U. (2021). Pengembangan Media Alat Praktikum Pelayangan Gelombang Berbasis Mikrokontroler Arduino Uno. Jurnal Inovasi Dan Pembelajaran Fisika, 8(2), 168–183. https://doi.org/10.36706/jipf.v8i2.14420

Dinata, Y.M. (2015). Arduino Itu Mudah. Jakarta: Penerbit Elex Media Komputindo.

Yudiafarani, F., Susilawati, S., Gunawan, G., & ‘Ardhuha, J. (2022). Kelayakan Perangkat Pembelajaran Momentum dan Impuls dengan Model Inkuiri Terbimbing untuk Meningkatkan Pemahaman Konsep Peserta Didik. Jurnal Ilmiah Profesi Pendidikan, 7(2c), 755–760. https://doi.org/10.29303/jipp.v7i2c.640

Downloads

Published

2023-09-20

How to Cite

Maryani, M., Azizah, S. Y. N., Febrianty, W. ., Amri , H. A. ., Fuadiyah , T. ., Putri , M. K. ., & Subiki, S. (2023). Design and Development of a Physics Laboratory Tool Based on Arduino Nano Sensor for the Topic of Uniformly Accelerated Linear Motion (UALM). International Journal of Educational Sciences and Development, 1(1), 30–36. https://doi.org/10.54099/ijesd.v1i1.615

Issue

Vol. 1 No. 1 (2023)

Section

Articles

License

Copyright (c) 2023 International Journal of Educational Sciences and Development

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Most read articles by the same author(s)